Fast, Reliable Heating & Furnace Across Moore
Heating and furnace repair in Moore typically runs $135-$630, with most calls completed same day. Furnace replacement in Moore’s post-2013 rebuilt neighborhoods averages $3,150-$6,750, and our Heating & Furnace team answers live 24/7 at (866) 561-3358.
We’ve been the company Moore homeowners call when the furnace quits on a February night or when that builder-grade system from the rebuild finally gives out. We know the difference between a 1978 original ranch off SW 4th Street and a 2015 tract home near Plaza Towers Elementary, and we know what each one needs. Our technicians carry parts for Carrier, Trane, Bryant, and American Standard systems on every truck, and most Moore calls are handled in a single visit. We’re not the cheapest outfit in the OKC metro, and we don’t try to be. We’re the ones you call when you want it fixed right and never thought about again.
Why Fireside Heating & Air Co. Is Moore’s Preferred Heating & Furnace Company
Fireside has served homeowners for over 8 years, and our reputation in Moore is built on showing up when we say we will and quoting a price we stand behind. We’re not a franchise with rotating crews. Our background-checked, uniformed technicians are trained journeymen who put on shoe covers without being asked and treat your home the way they would their own mother’s.
Moore sits in one of the most furnace-punishing climates in the country. Summer heat indices exceed 105°F while winter lows drop into single digits, forcing systems through a 100°F+ operational range every single year. That kind of thermal cycling cracks heat exchangers, wears out ignitors, and tests every weld and seal. We’ve replaced furnaces in the original 1970s ranches that survived the 1999 tornado and in the rebuilt neighborhoods where entire blocks share identical 2014 install dates. That local knowledge matters when we’re diagnosing why your system failed and what will actually fix it.
Our 90-Day Done Right Promise applies to every job in Moore: if it’s not done right, we make it right, in writing, no paperwork, no arguing. And a live person answers our phones at 2 a.m. on a Sunday, including holidays. The price we quote is the price you pay. Full stop.
Our Heating & Furnace Services in Moore
Furnace Repair
Most furnace repair calls in Moore fall between $135 and $630. We see a lot of ignitor failures in the post-2013 rebuilt homes, where builder-grade components installed under disaster timelines are now failing prematurely. In the older surviving stock, we regularly find gas valves stuck from decades of Oklahoma dust and temperature swings. Our trucks carry replacement ignitors, gas valves, control boards, and sensors for Carrier, Trane, Bryant, and American Standard systems, so we’re not making a second trip.

Furnace Replacement
Furnace replacement in Moore runs $3,150-$6,750 depending on system size, efficiency rating, and whether ductwork modifications are needed. This is where Moore’s unique housing landscape really matters. In the tornado-rebuilt sections, whole streets share 2014-2016 HVAC install dates, meaning systems are failing in clusters by neighborhood rather than randomly. A 10-year-old builder-grade 14-SEER furnace with a cracked heat exchanger or failed gas valve often makes more sense to replace than repair, especially when the original installation was rushed. We can quote a proper 96% AFUE replacement with correct load calculation, not a swap-out based on whatever was there before.

Furnace Tune-Up
Our $89 seasonal tune-up catches problems before they become 2 a.m. emergencies. In Moore, this means inspecting the heat exchanger for stress cracks from thermal cycling, testing gas pressure and ignition sequence, and checking the condensate drain for blockages from Oklahoma’s hard water and pollen loads. For homes in hail-prone areas, we also inspect the outdoor unit for fin damage that can restrict airflow and force the furnace to work harder. A tune-up every fall is cheap insurance against a January failure.

Heat Exchanger Inspection & Replacement
Heat exchanger replacement in Moore ranges $135-$630 for the component, though in older systems we often recommend full furnace replacement once labor and other worn parts are factored in. Original 1970s-1990s heat exchangers in Moore’s surviving ranch homes develop stress cracks from decades of punishing seasonal temperature swings. This isn’t a repair to defer. A cracked heat exchanger can leak carbon monoxide. We test every exchanger we access, and if it’s compromised, we show you the camera footage and explain your options plainly.

Ignitor Replacement & Gas Valve Repair
Ignitor replacement and gas valve repair in Moore both typically fall in the $135-$630 range. Post-2013 rebuilt homes see a lot of both. The low-cost silicon nitride ignitors and gas valves installed by volume builders under post-disaster timelines have higher failure rates than premium components. We’ve replaced dozens in the neighborhoods south of 19th Street where entire blocks went up in 2014-2015. If your furnace is cycling on and off, clicking without firing, or throwing an ignition lockout code, call us. We’ll diagnose it honestly and tell you whether a $200 ignitor fix makes sense or if you’re throwing money at a system that’s telling you it’s done.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Moore
We train our technicians on nine major brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. For Moore customers, this means we stock common parts locally for Carrier, Trane, Bryant, and American Standard systems, the brands we see most often in both the original housing stock and the post-2013 rebuilds. We don’t order parts from Dallas and make you wait three days. Our warehouse keeps heat exchangers, gas valves, ignitors, control boards, and blower motors on the shelf, and our trucks leave the shop stocked for same-day repair. If your system is one of the less common brands, we source overnight and get back to you next morning.
Common Heating & Furnace Problems We See in Moore Homes
- Stress-cracked heat exchangers in original 1970s-1990s furnaces. Decades of Moore’s extreme temperature swings, from summer highs above 105°F to winter lows in single digits, fatigue the metal until it cracks. We find this most often in surviving ranch homes off SW 4th Street and in the 73160 zip code areas that escaped tornado paths. A cracked exchanger means immediate replacement, no exceptions.
- Ignitor and gas valve failures in post-2013 builder-grade systems. The compressed rebuild timeline after the 2013 tornado meant volume builders installed low-cost components with shorter service lives. We’re now seeing these fail in clusters, sometimes three calls on the same street in a single week.
- Hail damage to outdoor units forcing furnace overwork. Moore sits squarely in Oklahoma’s “hail alley.” Spring storms with golf-ball-sized hail bend condenser fins and puncture coils, damaging control boards and refrigerant lines. A compromised outdoor unit makes the indoor furnace work harder to compensate, accelerating wear on blower motors and heat exchangers.
- Ductwork compromised by storm-shelter retrofits. Many rebuilt homes and some retrofitted older homes have in-ground or above-ground storm shelters that required creative duct routing during construction. We’ve found collapsed flex duct, restricted returns, and poorly sealed plenums that starve furnaces of airflow and cause chronic overheating.
Heating and Cooling in Moore Done Right
Fireside keeps furnaces and ACs honest for homeowners across Oklahoma City Metro. Our journeymen know the toll Oklahoma wind and red clay take on builder-grade systems, and they know the first freeze catches half the metro’s heat pumps napping. When your unit quits, you get straight talk on repair versus replace, a price that holds, and a technician who puts on shoe covers without being asked. we coordinate through our Oklahoma City Metro service area
We stand behind every job with the Keystone Standard: 90 days, in writing, no arguing. That’s the Fireside promise, named for the warmest word in the American memory. Ask about our $89 seasonal tune-up before the next heat wave rolls through.
Heating & Cooling in Moore That Stays Done Right
Oklahoma summers don’t ease you in, and winter wind cuts straight through a house with a struggling furnace. In Oklahoma City Metro, we see the same seasonal pattern every year: the first heat wave pushes old condensers past their limit, and the first freeze exposes the cracks in a system that got by on luck. Our techs are trained journeymen, not salesmen in coveralls. We’ll give you the honest math on repair versus replace, tune your system before it breaks, and stand behind the work with our 90-Day Done Right Promise - in writing, no arguing. we coordinate through our Oklahoma City Metro service area
Heating & Cooling in Moore That Stays Done Right
Oklahoma summers don’t ease you in, and winter wind cuts straight through a house with a struggling furnace. In Oklahoma City Metro, we see the same seasonal pattern every year: the first heat wave pushes old condensers past their limit, and the first freeze exposes the cracks in a system that got by on luck. Our techs are trained journeymen, not salesmen in coveralls. We’ll give you the honest math on repair versus replace, tune your system before it breaks, and stand behind the work with our 90-Day Done Right Promise - in writing, no arguing. we coordinate through our Oklahoma City Metro service area
Pricing for Heating & Furnace in Moore, OK
Here’s what heating and furnace service costs in Moore’s market. These are real ranges based on jobs we’ve completed in the 73160 area and nearby.
| Service | Typical Range in Moore |
|---|---|
| Furnace Repair | $135 - $630 |
| Furnace Replacement | $3,150 - $6,750 |
| Heat Exchanger Replacement | $135 - $630 |
| Ignitor Replacement | $135 - $630 |
| Seasonal Tune-Up | $70 - $180 |
What moves the needle within these ranges? System accessibility matters. A furnace in a cramped attic closet costs more to work on than one in a spacious garage utility room. Ductwork modifications for storm-shelter retrofits add labor. High-efficiency 96% AFUE replacements need condensate drainage and venting changes that 80% systems don’t. We quote every job upfront, in writing, before we start. The price quoted is the price paid. We also honor our standing offers: $50 off any repair over $250, free second opinion on any written estimate, $89 seasonal tune-up, and a permanent 5% discount for seniors and veterans. Call (866) 561-3358 for a free estimate.
We Also Serve Cities Near Moore
Our Heating & Furnace in Moore coverage extends throughout the south OKC metro. We regularly run calls to Del City, Norman, Midwest City, and Newcastle, with the same live-answer phones, same stocked trucks, and same 90-Day Done Right Promise. Whether you’re in a 1960s ranch in Del City or a new build in Newcastle, we treat the job the same way.
Serving Moore, OK - Our Local Coverage Area
We’re based in the Moore area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Heating & Furnace in Moore
If your 2014 builder-grade furnace has needed repairs more than once in the past two winters, replacement is likely the smarter money. These systems were installed under compressed post-disaster timelines with lower-tier components, and we’re seeing them fail in clusters across Moore’s rebuilt neighborhoods. A new 96% AFUE system will cut your gas bill and come with a fresh warranty. Call (866) 561-3358 for a free replacement quote, and ask about our $50 off repair or free second opinion if you’ve already gotten another estimate.
Yes. We serviced a 1978 original furnace in a surviving ranch home off SW 4th Street near the 1993 addition. The Lennox G8 gas valve had failed, and the heat exchanger showed stress cracks, a classic scenario where original hardware, past its service life, forced a retrofit decision. We replaced it with a Carrier 96% AFUE system, routing the new plenum around an in-ground storm shelter that had been retrofitted under the slab. We design the replacement around your existing footprint. No shelter movement needed. Call (866) 561-3358 and we’ll survey your layout.
Bent condenser fins can often be combed straight and the coil pressure-tested for leaks, but punctured coils or damaged control boards usually mean replacement of the outdoor unit. In Moore’s hail alley, we inspect dozens of these every spring. The key question is whether the damage forced your furnace to overwork, which can mask as a furnace problem when it’s really an outdoor unit issue. We diagnose both sides of the system honestly. Call (866) 561-3358 for a post-storm inspection, estimates are free.
The heat exchanger itself runs $135-$630, but with labor and the other worn parts in a 30-plus-year system, total repair often approaches half the cost of replacement. In Moore’s original 1970s-1990s housing stock, we generally recommend replacement when the exchanger fails, the system is past its service life, parts availability is shrinking, and a new 96% AFUE unit will cut operating costs significantly. We’ll show you both numbers and let you decide. Call (866) 561-3358 for an exact quote.
Moore’s catastrophic EF5 tornadoes in 1999 and 2013 leveled entire neighborhoods and triggered mass rebuilds, creating a distinctive two-tier housing landscape unique in the OKC metro: large swaths of 2013-2016 tract construction where builder-grade HVAC systems are simultaneously hitting the 10-12 year replacement cliff, alongside older surviving stock with 30+ year original equipment. No neighboring suburb, Midwest City, Norman, or Mustang, shares this compressed, rebuild-driven replacement surge. In tornado-rebuilt sections of Moore, whole streets share 2014-2016 HVAC install dates, meaning systems are failing in clusters by neighborhood rather than randomly. A savvy tech can spot this pattern and advise proactive replacement before the midwinter rush. That’s what we do. Call (866) 561-3358 to schedule a furnace evaluation.
Written by Glen Hartman, Owner at Fireside Heating & Air Co., serving Moore since 2018.