Fast, Reliable Heat Pump & Mini Split Across Aurora
Heat pump and mini split repair in Aurora typically costs $150-$700, while full installation runs $3,500-$7,500. Most jobs are completed in a single visit, and our Heat Pump & Mini Split team carries parts for Carrier, Trane, and Bryant systems on every truck. Call (866) 561-3358 - a live person answers, 24 hours a day.
We’ve been serving homeowners since 2018, and Aurora’s unique housing stock keeps us sharp. The city sits at 5,400 feet on the High Plains, split between aging post-WWII ranches in the west and booming new construction in the east. That east-west divide means a technician here must handle everything from 1960s evaporative-cooler conversions with undersized ductwork to brand-new subdivisions where builder-grade equipment is failing ahead of schedule. Glen Hartman built Fireside on the principle that every job gets done right - or we make it right, in writing, for 90 days. No arguing. No paperwork.
Why Fireside Heating & Air Co. Is Aurora’s Preferred Heat Pump & Mini Split Company
Our reputation in Aurora was earned house by house, starting with the ranch homes near Buckley Air Force Base and spreading east through Centennial and into the new developments along E-470. Homeowners here remember who showed up at 2 a.m. during a January cold snap and who quoted a price that didn’t budge when the bill came.
We answer every call with a live person - nights, weekends, holidays. No voicemail tree, no callback queue. Our background-checked, uniformed technicians put on shoe covers without being asked and treat your home like their mother’s. The 90-Day Done Right Promise means if something isn’t right, we fix it. No forms to fill out, no manager to escalate.
Most Aurora calls are same-day or next-day. We stock parts locally for nine major brands, so we’re not ordering a control board from out of state while your house sits at 52 degrees. Glen Hartman has run Fireside this way for over 42 years because it’s the only way that makes sense.
Our Heat Pump & Mini Split Services in Aurora
Heat Pump Repair
Heat pump repair in Aurora runs $150-$700 depending on what’s failed. The most common misdiagnosis we see? A system that won’t maintain temperature gets blamed on a bad compressor when it’s actually choking on ductwork never sized for refrigerated air. In 80010 and 80011 especially, we test static pressure before we quote parts. Saves you money and saves us a callback.
Altitude derating is another frequent miss. Aurora’s 5,400-foot elevation requires gas furnace components to be derated roughly 4% per 1,000 feet. Out-of-market contractors skip this, and the result is short cycling, failed heat exchangers, and refrigerant leaks at braze joints on 10-15 year old Carrier units. We check it every time.
Heat Pump Installation
New heat pump installation in Aurora ranges from $3,500 to $7,500. The wide spread reflects real differences in your home: a 1967 ranch on East 6th Avenue with original evaporative-cooler ductwork needs more than a equipment swap. It needs a duct redesign for proper static pressure, possibly a multi-zone system to solve chronic hot spots, and always proper altitude calibration.
Eastern Aurora’s newer homes in 80015-80019 face the opposite problem. Builder-grade heat pumps installed at minimal size struggle when Colorado’s temperature swings hit. Chinook winds can push a system from heating to cooling mode and back within hours, stressing controls that were barely adequate to begin with. We size for reality, not for the lowest bid.
Mini Split Install
Ductless mini splits are often the right answer for Aurora’s older homes. No ductwork to retrofit. No fighting 60-year-old trunks that were never engineered for airflow. We install single-zone systems for additions, garages, and converted basements, plus multi-zone systems that let a 1970s ranch finally have even temperatures room to room.
In a 1967 ranch home on East 6th Avenue in 80010, our crew found a failed single-zone mini split installed three years prior. The homeowner’s complaint was persistent hot spots, but our diagnostics revealed the original undersized ductwork from an evaporative cooler conversion was choking airflow. We retrofitted the ductwork for proper static pressure and installed a multi-zone Daikin heat pump, restoring even comfort across all rooms. That’s the difference between a parts-swapper and a technician who reads the whole system.
Mini Split Repair
Mini split repair covers everything from refrigerant leaks to failed inverter boards. Aurora’s low humidity - annual average around 30% - means systems run dry, and control sensors fail more frequently than in coastal climates. We carry diagnostic tools and common parts for Daikin, Carrier, and Bryant mini splits on every truck, so most repairs finish in one trip.
Defrost cycle problems are a particular headache here. A heat pump that kicks into defrost on a 45°F day with 20% humidity usually doesn’t have ice on the coil. It’s miswired controls, often from a legacy evaporative-cooler conversion where someone patched in new equipment without updating the control logic. We trace the wiring, fix the root cause, and don’t charge you for a new outdoor unit you don’t need.
Ductless System & Multi-Zone System Specialists
Ductless and multi-zone systems solve problems that forced-air can’t touch. A sunroom that overheats. A master bedroom that’s always ten degrees off. A converted basement with no duct access. We design these systems for how you actually live in your home, not for a floor plan from 1964.
Multi-zone systems are especially valuable in Aurora’s split-level and raised-ranch homes, where one thermostat can’t possibly serve three distinct thermal zones. Each indoor head gets its own control. You stop heating empty rooms. Your system stops working itself to death.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Aurora
We train our technicians on nine major brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. For Aurora customers, that means we stock common control boards, sensors, and refrigerant fittings locally - not in a warehouse three states away. A failed reversing valve on a Bryant heat pump in 80016 doesn’t wait on FedEx. We pull it from our inventory, install it, and test the full system before we leave.
Daikin mini splits get particular attention on our trucks. Their inverter technology handles altitude and temperature swings better than most, which matters when you’re sitting at 5,400 feet with Chinook winds rolling through. We see fewer callbacks on Daikin multi-zone systems than on any other brand we install.
Common Heat Pump & Mini Split Problems We See in Aurora Homes
- Defrost cycles triggered by miswired controls, not actual ice. On a dry 45°F day in Aurora, your heat pump shouldn’t be defrosting. When it does, the culprit is usually control wiring from an old evaporative-cooler conversion that was never properly integrated with modern heat pump logic. We trace the sequence and fix the wiring, not the coil.
- Compressor short-cycling in eastern subdivisions. Builder-grade ductwork in 80015-80019 was sized for the cheapest possible AC unit, not for the airflow demands of a high-SEER heat pump. The compressor starts, pressure builds too fast, safety switches trip. Repeat until the compressor dies. We measure static pressure and redesign the duct path if needed.
- Refrigerant leaks at braze joints on aging Carrier units. Ten to fifteen year old systems in Aurora often leak where altitude derating was skipped during original installation. Higher pressures than the joints were rated for, thermal cycling from Chinook temperature swings, and eventually a slow leak that drops capacity before it triggers a fault code. We pressure-test, re-braze with proper alloys, and document the derating for warranty.
- Chronic hot spots misdiagnosed as equipment failure. In western Aurora’s 80010 and 80011 ZIPs, the ductwork in 1960s-1970s homes was originally designed for evaporative coolers, not refrigerated air or heat pumps. The trunks are too small. Supplies are in the wrong rooms. Homeowners buy new equipment twice before someone measures airflow and tells them the real problem. We measure first.
Heating and Cooling in Aurora, Done Right
Denver Metro winters start sharp and summers climb fast. Your furnace works hard at altitude, and that first heat wave tests every builder-grade AC that came with the tract house. Fireside keeps Aurora homes steady through both, with journeymen who size the fix honestly, tape the boot seams, and leave the thermostat where they found it.
We named this company for the warmest word in the American memory because that’s the feeling we deliver, backed by our 90-Day Done Right Promise in writing. we coordinate through our Denver Metro service area Same-day service when the season turns. Ask about our $89 seasonal tune-up.
Heating & Cooling in Aurora
Colorado’s altitude swings and dry winters punish furnaces hard, then the first June heat wave tests every AC that sat idle for eight months. We see it every season: builder-grade units in tract housing aging past their design life, coils clogged from cottonwood season, no-heat calls at 2 a.m. when the temperature drops forty degrees overnight. Our techs are licensed, insured journeymen who give you honest math on repair versus replace, put on shoe covers without being asked, and leave the price where you can read it. we coordinate through our Denver Metro service area
Ask about our $89 seasonal tune-up. Catch the problem before the cold front does.
Heating & Cooling in Aurora
Colorado’s altitude swings and dry winters punish furnaces hard, then the first June heat wave tests every AC that sat idle for eight months. We see it every season: builder-grade units in tract housing aging past their design life, coils clogged from cottonwood season, no-heat calls at 2 a.m. when the temperature drops forty degrees overnight. Our techs are licensed, insured journeymen who give you honest math on repair versus replace, put on shoe covers without being asked, and leave the price where you can read it. we coordinate through our Denver Metro service area
Ask about our $89 seasonal tune-up. Catch the problem before the cold front does.
Pricing for Heat Pump & Mini Split in Aurora, CO
Here’s what heat pump and mini split work actually costs in Aurora. These are real ranges based on jobs we’ve completed across 80010, 80011, 80016, and 80019 - not teaser prices that balloon once we’re in your basement.
| Service | Price Range in Aurora |
|---|---|
| Heat Pump Repair | $150-$700 |
| Heat Pump Installation | $3,500-$7,500 |
| Tune-Up | $80-$200 |
What moves you within these ranges? For repair, it’s parts versus labor - a failed capacitor is quick, a seized compressor is not. For installation, it’s ductwork condition, electrical panel capacity, and whether we need to run new linesets or refrigerant piping. A straight swap in a 2010 tract home with good ductwork lands at the lower end. A 1964 ranch with evaporative-cooler trunks and a fuse box needs more.
We quote upfront, in writing, before any work starts. The price you agree to is the price you pay. No add-ons discovered mid-job. Call (866) 561-3358 for a free estimate - we’ll look at your specific situation and give you a number that doesn’t change.
Current offers: $50 off any repair over $250. Free second opinion on any written estimate. $89 seasonal tune-up. Senior and veteran discount of 5%, always.
We Also Serve Cities Near Aurora
Our service area extends to Castlewood, Centennial, Commerce City, and Englewood. Same live-answer phones, same 90-Day Done Right Promise, same technicians who know the difference between a home built for Buckley families and one built for the E-470 corridor. If you’re near Aurora, you’re in our territory.
Serving Aurora, CO - Our Local Coverage Area
We’re based in the Aurora area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Heat Pump & Mini Split in Aurora
Yes - that’s exactly what ductless mini splits are designed for. They need no ductwork at all. In western Aurora’s 1960s ranches, we often install a multi-zone system with one outdoor unit and two to four indoor heads, bypassing the original evaporative-cooler ducts entirely. The indoor units mount on walls or ceilings, and each room gets its own thermostat. Call (866) 561-3358 and we’ll walk through your floor plan - estimates are free.
Aurora sits at roughly 5,400 feet, and gas furnace components must be derated approximately 4% per 1,000 feet above sea level. Skip this step and the system runs at higher pressures than designed, accelerating wear on heat exchangers and refrigerant joints. It’s a code requirement, not a suggestion, and out-of-market contractors miss it regularly. Our technicians calculate derating on every Aurora installation. Call (866) 561-3358 if you suspect your current system was never properly set up.
At 15 years, you’re at the decision point. If the repair is under $400 and the system has been reliable, repair makes sense. If it’s a failed compressor, refrigerant leak, or second major repair in two years, replacement is the better value - especially given that 2005 builder-grade equipment in eastern Aurora was often minimally sized for the ductwork it serves. A new properly sized heat pump with corrected duct static pressure will cut your heating bills and end the callback cycle. We give straight talk on repair versus replace - call (866) 561-3358 for a free second opinion.
Chinook winds can swing Aurora temperatures 40°F or more within hours, forcing your heat pump to switch between heating and cooling modes repeatedly. This thermal stress accelerates wear on reversing valves, control boards, and expansion valves. Systems with poorly programmed or outdated controls short-cycle or lock out entirely. We see this most in equipment installed without altitude-specific programming. A proper setup accounts for rapid swings, and a seasonal tune-up catches wear before it becomes a failure. Our $89 tune-up includes control sequence verification - call (866) 561-3358 to schedule.
A full conversion from evaporative cooling to a heat pump in Aurora typically runs $3,500-$7,500, with most western Aurora ranches landing in the $4,500-$6,000 range. The variable is ductwork: evaporative-cooler trunks are too large for proper AC static pressure and too small for adequate airflow. We often need to resize or replace significant duct sections, add returns, and reconfigure supplies. It’s more than an equipment swap, but it’s the only way to get even, efficient comfort. We quote the full job upfront - call (866) 561-3358 for a free estimate.
Ready to talk about your heat pump or mini split? Call Fireside Heating & Air Co. at (866) 561-3358. A live person will answer, 24 hours a day. We’ll schedule a free estimate, send a background-checked technician in uniform, and back every hour of work with our 90-Day Done Right Promise - in writing, no arguing, no paperwork. Glen Hartman has run this company since 2018 on one simple idea: do it right, or make it right. That’s the K.E.Y.S. code. Krafted right. Every time. Your home first. Standing behind it.
Written by Glen Hartman, Owner at Fireside Heating & Air Co., serving Aurora since 2018.